A Sportswear Manufacturer Built for Performance Fabric and Fast Turnaround
PRP Apparel makes activewear for small and growing sportswear brands: compression leggings in nylon/spandex 80/20 or polyester/spandex 87/13, sports bras in low, medium and high support, training and running shorts, gym tops and full matching sets, at 150–280 GSM depending on the garment. Flatlock seaming, bonded seams and sublimation all-over print are done in-house. Orders start at 50 pieces per style, with colours and sizes mixed inside those 50. Send a tech pack or a reference garment and we’ll reply within one business day — most brands start with one paid sample.
MOQ
50 Pieces Per Style
colours and sizes can be mixed
SAMPLE LEAD TIME
7–14 Days
per round, 1–3 rounds typical
BULK LEAD TIME
25–45 Days
from approved sample to shipped order
SAMPLE COST
$80–$250
per set, by construction complexity
Compression and Performance Apparel Need Flatlock Seams, Not a Basics Overlock
Most factories that produce sportswear are set up for basics — a standard overlock seam, one fabric blend, minimal fit testing — and apply that same line to a compression legging or a fitted training top without changing the construction. PRP Apparel runs flatlock seaming in-house as standard input for compression leggings, sports bras, and fitted training tops, because a standard overlock seam sits proud against the skin and chafes under repeated stretch — flatlock lies flat and moves with the fabric instead of against it. Fabric sourcing runs nylon/spandex at roughly 80/20, polyester/spandex at roughly 87/13, and rPET blends at 150–280 GSM depending on the garment, with the flatlock machines, cutting, and QC all running under one roof rather than split across subcontractors. For team kits, sublimated jerseys, and tracksuits specifically, our guide to custom sportswear manufacturing goes deeper on the low-MOQ team-order side of the category.
For the fuller breakdown of fabric blends, GSM ranges, and moisture-management finishes across performance apparel generally, our activewear fabrics guide covers the material science this page assumes. Sublimation AOP printing is in-house, so an all-over graphic on a compression legging or a sublimated jersey doesn’t wait on a second vendor’s dye-sublimation run — pattern, fabric, and cut happen on the same production floor. Pantone-matched solid dyeing keeps team-kit colorways consistent across a full order, and bonded seam construction is available where a fully seamless finish matters more than flatlock’s stretch recovery.
Sample development runs 7–14 days per round, with most first styles settling within 1–3 rounds before we cut for bulk — cost is $80–$250 per sample set depending on construction complexity. OEKO-TEX Standard 100 fabric certification and ISO colorfastness testing (ISO 105-C06, ISO 105-X12, ISO 105-E04) are available on request for brands selling into markets that require documentation.
Small Orders Get the Same Fabric Testing as Full Range Runs
A 50-piece training-top order runs through the same fabric recovery checks, seam testing, and QC as a 500-piece team-kit reorder — nothing gets shortcut because the run is small. The details below are what that looks like on the floor.

Every stretch fabric batch is hand-checked for recovery and grain before it goes to the cutting table, so a compression legging holds its shape after repeated wear rather than sagging out.

Ventilation panels on training tops and shorts run on laser-perforated technical mesh, cut to a marked pattern rather than a generic pre-punched roll.

Technical knit fabric runs through in-line finishing equipment before cutting, so the fabric’s stretch and recovery are locked in ahead of pattern layout.
Sportswear Production Specs
Every number below is our standard production term — the same terms whether the order is 50 pieces or 500.
| MOQ | 50 pieces per style — colours and sizes can be mixed inside those 50, so one legging style in three colours can be a single order |
| Sample lead time | 7–14 days from order confirmation |
| Sample cost | $80–$250 per sample set, depending on complexity |
| Sample rounds | 1–3 rounds standard before bulk cutting |
| Bulk lead time | 25–45 days from approved sample to shipped order |
| Fabric blends | Nylon/spandex ≈80/20, polyester/spandex ≈87/13, rPET blends |
| Fabric weight range | 150–280 GSM depending on style — compression leggings run heavier than training tops |
| Construction | In-house flatlock seaming (standard), bonded seam construction (available), cut-and-sew for team kits and outerwear |
| Printing & finishing | Sublimation AOP, Pantone-matched solid dyeing and embroidery in-house; screen print and heat transfer available on the same order |
| Order paths | OEM (your tech pack) · ODM (from your brief) · Private Label (rebrand a base style) |
| Fabric certification | OEKO-TEX Standard 100 available on request |
| Colorfastness testing | ISO 105-C06, ISO 105-X12, ISO 105-E04 on request |
| Unit price guide (50 pcs) | Training shorts USD 7–12 · compression leggings (nylon/spandex, flatlock) USD 14–22 · complex sublimation sets USD 25–40 per unit; roughly 15–30% lower from 200 pieces (garment only, FOB Shenzhen; decoration and custom trims quoted separately; final price on your quote) |
| Recycled fabric | rPET blends available, with GRS documentation for rPET orders |
Where This Fits: Individual Performance Wear or Full Team Kits
Sportswear is one of eight industries we build for, alongside fashion labels, startup brands, and streetwear lines. If your line runs lighter and less technical than compression apparel — jersey basics, fitted fashion silhouettes, no performance-fabric requirement — see how we build for fashion brands placing full collections for the construction detail that fits that category better. If this is your first production order at any weight or fit, see how we work with startup and first-time brands. For the full fabric range including the technical blends sportswear runs on, see the full fabric range.
Frequently Asked Questions
What's the minimum order for a sportswear style?
50 pieces per style, and colours and sizes can be mixed inside those 50. One legging style split across black, navy and olive in XS–XL is a single 50-piece order.
Why does flatlock seaming matter for compression apparel?
A standard overlock seam sits proud against the skin and chafes under repeated stretch and movement. Flatlock seaming lies flat against the fabric, which is why it’s standard input on our compression leggings, sports bras, and fitted training tops rather than an upcharge option.
Can you match my fabric blend for a compression legging?
In most cases, yes. Nylon/spandex at roughly 80/20 and polyester/spandex at roughly 87/13 are our standard compression-fabric blends, with rPET blends available at 150–280 GSM. Send a swatch or spec sheet and we’ll confirm the closest match.
Do you handle sublimation printing for team kits?
Yes, sublimation AOP is in-house, along with Pantone-matched solid dyeing for consistent colorways across a full team-kit order. Embroidery runs in-house too; screen print and heat transfer are available on the same order.
How long does a sportswear order take from approved sample to delivery?
25–45 days for bulk production after the sample is approved, with sampling itself running 7–14 days per round.
If a style sells out, what does a reorder look like?
A reorder runs the same 25–45 day bulk lead time and pricing structure as the first order — no re-negotiation and no minimum increase for a repeat colorway or a restock of the same style.
What does a compression legging cost at 50 pieces?
As a guide, USD 14–22 per legging in nylon/spandex with flatlock seams. Training shorts run USD 7–12 and a complex sublimation set USD 25–40. Prices drop roughly 15–30% from 200 pieces. All figures are garment only, FOB Shenzhen; decoration and custom trims quoted separately; final price on your quote.
Can I mix colours and sizes inside a 50-piece order?
Yes. The minimum is 50 pieces per style, and you choose how those 50 split across colours and sizes — for example 20 black, 15 navy and 15 olive across XS to XL.
Ready to Start Your Sportswear Line?
Send a tech pack, a reference garment, or a spec sheet for your line and we’ll reply with what it takes to get a sample started.
